The VisionRGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650MB/s transfer bus bandwidth providing a further improvement to the 480MB/s of the VisionRGB-E2. This video capture has two complete capture channels supporting up to 1920x1200 DVI or 2048x1536 Analog resolution.
The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionRGB-E2S capture card transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S capture card sends the relevant portions of each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionRGB-E2S capture card is an ideal solution for applications require the capture of Analog or DVI sources in real time. Typical applications include:
Viewing Analog or DVI sources from PCs, MACs, Industrial or medical equipment, cameras and other video equipment
Streaming video applications
Video wall controllers
For streaming applications, the VisionRGB-E2S can be used with Windows® Media Encoder to compress and stream captures video. To replay the video, use Windows® Media Player.
Any application compatible with Windows® Direct-Show technology can use the VisionRGB-E2S video capture card due to its built in WDM support.
VIDEO STREAMING SUPPORT
DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Microsoft Expression Encoder
Microsoft Windows® Media Encoder
Adobe Flash Encoder
AMCap and other DirectShow compatible software.
For further details see the Datapath DirectShow SDK documentation supplied as part of a typical installation.
The VisionRGB-E2S capture card is supplied with a powerful software application for configuring timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E2S application to automatically detect the video source format and display the captured video in a window on your desktop.
The VisionRGB series is ideal for a wide range of applications including:
dataton-watchout-logoMedical imaging: Capture legacy RGB modalities
Multi display presentation software: Recommended by industry leaders Dataton WATCHOUTTM
Digital signage: Integrated by C-nario into their world class, open platform digital signage software solutions
C-nario-logoMachine vision: Acquire high resolution camera outputs
Voyage data recorders: Capture radar images
Simulation/military: Acquire high resolution video and simulation for command and control
Datapath Vision RGB-E2S Capture Card
Component HD up to 1080p at 60 frames per second
HDMI capture up to 1080p (Audio & HDCP not supported)
DVI up to 1920 x 1200\VGA up to 2048 x 1536
Maximum data rate 650MB/sec
SPECIFICATION FOR THE VisionRGB-E2s VIDEO CAPTURE CARD:
PCI Express x4 half size card, 110mm x 170mm
PCI Express bus master with scatter gather DMA
Two DVI-I type connectors
Maximum sample rate
170 MHz analogue RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling
Maximum data rate
VisionRGB-E2 480 MB/s
VisionRGB-E2s 650 MB/s
RGB: 24 bits per pixel/8-8-8 format
Video capture memory
64 MB (updated in real time). Triple buffered
Analog RGB mode support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536,Custom modes
DVI single-link mode support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and Custom modes
1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component HD-DVI connector (HDCP not supported)
Input mode detection
Automatic detection of input modes in hardware enabling the tracking of mode changes in the source signal
Pixel transfer formats
RGB: 555, 565 or 888 pixels (24bit/32bit) pixels.
YUV 4:2:2, UYVY, YUY2, YVYU
User defined, captured frame rate will match the source providing max data rate (650MB/s is not exceeded)
Triple buffered to eliminate tearing artifacts.
Video format options
Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green (3 wire)
DVI Single Link
Operating system support
Windows® XP Professional, Windows® Server 2003, Windows Vista®, Windows® Server 2008, Windows® 7 (x86 and x64 Operating Systems), Windows® 8 and Linux (NOTE: Check Linux specific features with Sales)
Max current at +3.3V - 0.25A.
Max current at +12V - 1.2A.
Max power - 15 Watts.
0 to 35 deg C.
-20 to 70 deg C.
5% to 90% non-condensing
Analog input range
Min 0.5Vpp Max 1.0Vpp
15kHz - 110kHz
No hardware limits, typically 25Hz - 200Hz for real signals
Separate sync polarity
Positive or Negative. (Separate H & V sync, Composite Sync)
Sync on green polarity
Inputs 75 Ohm terminated
Warranty 3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
USD $1431.00 In-Stock
Board Model 150 150B 150C 150D 150E
Free Freight !