Advanced Capture & IP Streaming Technology
Capturing and encoding video for digital streaming or storing is a key requirement for the professional AV market . Users need to be able to capture video and not only send the data to the screen but transport compressed video to online resources or to storage locations for remote access or later retrieval.
The Datapath VisionHD2-SQX is an advanced video capture card with SQX technology that allows captured video to be encoded into H.264. Featuring three independent capture channels the VisionHD2-SQX allows users to capture two high definition 1920x1200 video feeds and directly encode them into H.264 using the dedicated SQX processor.
Each encoded video can be utilized by the SQX media server for distribution over a network. In addition raw captured video can be rapidly transferred to graphics hardware or system buffers for viewing or further processing.
Datapath SQX Technologies
Datapath’s SQX encoding technology uses the global H.264 standard for video compression and streaming. Multiple streams of captured video can be simultaneously encoded and streamed to different locations. The VisionHD2-SQX can capture two 1920x1200 channels, the encoding engine can encode one channel at 60 fps or both at 30 fps, allowing one stream to be broadcast over the internet and another to be stored to disk. A single stream can be distributed to any number of network locations all configured through a media server.
USD $2562.00 Available
Board Model 165B
Triple channel audio and video capture
Dual channel HD capable capture
Single channel SD capture
On-board SQX Encoding Engine
H.264 / MPEG4
Specification of the VisionHD2-SQX Capture Card:
Board Format PCIe x8 plug-in card
Connectors Three channel input: 2 x DVI-I, 1 x RCA (female)
Support HDMI 1.3 to 225 MHz HDMI, audio source can be selected for audio streaming. TMDS equalizer for 20m cable support
Supports DVI 1.0 RGB 24 bit capture to 165 Mhz. TMDS equalizer for 20m cable support.
VGA / YPbPr Capture
Triple ADCs sampling up to 170sos. Full 4:4:4 sampling, 8 bits per colour 5-wire, 4-wire or sink-on-green signal formats
Composite Video Capture
CCIR601 sampling. PAL, NTSC, SECAM formats with auto detection
Audio Capture Stereo line-in / Stereo balanced inputs with programmable gain (+/-12dB) 16 bit sampling at 44.1 / 48 / 96 kHz. Digital audio can be captured from both HDMI channels analogue stereo line-out for direct pass-through of selected input at up to 64 kHz sampling, sourced from analog input or HDMI channel
Video Capture Memory
512MB high bandwidth frame buffer supports triple buffering of HD and SD video. Local storage of complex scatter-gather tables for DMA engine
Polyphase FIR scaling engine (3x3) for hardware down-scaling and up-scaling. Colour space conversion allows captured data to be transferred in any format RGB: 16bit (5-5-5, 5-6-5), 24bit (8-8-8) or 32bit (8-8-8-alpha). YUV: 16bit (4:2:2). Mono: 8bit
Encoder H.264 Single channel compression, 1920x1200 60 fps. Dual channel compression 1920x1200 30 fps
Baseline Profile (PB) / Main Profile (MP) / High Profile (HiP)
Level 4.1 / Level 4.2
Max Video Coding Bit Rate
BP/ MP 50,000kbps / HiP 62,500kbps
Direct DMA to physical or virtual memory buffers with full scatter-gather support. DMA bandwidth: up to 800MB/s 16 independent DMA streams per HD channel including any mix of HD and SD sources, colour space, cropping and scaling parameters
OS Support Windows Vista / 7 / 8 / 8.1, Windows Server 2003 / 2008 / 2012
Power Requirements Maximum power ≈ 18W (TBC)
Operating Temperature 0 to 35 °C/ 32 to 96 °F
Storage Temperature -20 to 70 °C/ -4 to 158 °F
Relative Humidity 5% to 90% non-condensing
Warranty 3 years
Datapath VisionHD2-SQX Triple channel audio and video capture card.
Free Freight !